DC Impedance Modeling and Design-Oriented Harmonic Stability Analysis of MMC-PCCF-Based HVDC System
2021
Modular multilevel converter with passive circulating current filter (MMC-PCCF) is a novel topology that can inherently suppress circulating currents and has a lower modulation index penalty than traditional MMC. However, the harmonic stability issue of MMC-PCCF-based HVDC system is more complex, which has not been well addressed yet. This paper, for the first time, develops accurate dc impedance models of MMC-PCCF in different control modes and compares them with that of the traditional MMC in a wide frequency range mathematically. It is revealed that more resonance points exist in MMC-PCCF leading to higher harmonic instability risks. To comprehensively study the stability of MMC-PCCF-based HVDC system, this paper proposes a design-oriented harmonic stability analysis method based on resistance sensitivity and phase-difference sensitivity and sums up a guideline for the system stability improvement. Furthermore, this paper also presents a more intuitive explanation of the leading cause for system harmonic instability. It is demonstrated that the proportional coefficient of the dc voltage controller behaves as a negative resistance-inductance at the dc side. Based on this new sight, two typical damping control methods are compared in terms of parameter design and dynamic performance. Finally, real-time hardware-in-the-loop results verify the theoretical analysis.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI