Validation of constraint-based methodology in structural integrity of ferritic steels for nuclear reactor pressure vessels

VOCALIST (validation of constraint-based methodology in structural integrity) was a shared cost action project co-financed by DG Research of the European Commission under the Fifth Framework of the European Atomic Energy Community (EURATOM). The motivation for VOCALIST was based on the understanding that the pattern of crack-tip stresses and strains causing plastic flow and fracture in components is different to that in test specimens. This gives rise to the so-called constraint effect. Crack-tip constraint in components is generally lower than in test specimens. Effective toughness is correspondingly higher. The fracture toughness measured on test specimens is thus likely to underestimate that exhibited by cracks in components. The purpose of VOCALIST was to develop validated models of the constraint effect and associated best practice advice, with the objective of aiding improvements in defect assessment methodology for predicting safety margins and making component lifetime management decisions. The main focus in VOCALIST was an assessment of constraint effects on the cleavage fracture toughness of ferritic steels used in the fabrication of nuclear reactor pressure vessels, because of relevance to the development of improved safety assessments for plant under postulated accident conditions. This paper provides a detailed summary of the main results and conclusions from VOCALIST and points out their contribution to advances in constraint-based methodology for structural integrity assessment. In particular, the output from VOCALIST has improved confidence in the use of K J − T stress and K J − Q approaches to assessments of cleavage fracture where the effects of in-plane constraint are dominant. Cleavage fracture models based on the Weibull stress, σ W, have been shown to be reliable, although current best practice advice suggests that σ W should be computed in terms of hydrostatic stress (as distinct from maximum principal stress) for problems involving out-of-plane loading. Correspondingly, the results suggest that the hydrostatic parameter, QH, is the appropriate one with which to characterize crack-tip constraint in analysing such problems. The materials characterization test results generated as part of VOCALIST have provided added confidence in the use of sub-size specimens to deter- mine the Master Curve reference temperature, T 0, for as-received and degraded ferritic RPV materials. The usefulness of correlating the Master Curve reference temperature, T 0, with the constraint parameter, Q, has been demonstrated; however, the trend curves