Experimental study on leveling mechanism for material-jetting-type color 3D printing

The material-jetting-type (MJ) 3-D printing technology has advantages in resolution and color printing. During the printing process, a leveling technique is needed to precisely control the thickness and flatness of each layer. Roller-type leveling mechanism has been adopted in commercial MJ 3-D printers, but it is lack of research on roller leveling process parameters and establishing experimental procedures. Therefore, in this study, a roller-type leveling mechanism for a MJ color 3 D printer was developed, and experimental approaches were utilized to determine process parameters.,The roller-type leveling mechanism was chosen to provide functions of flattening and removal of excess material. The parameters studied were roller speed and rotational direction. Surface roughness, Ra, of printed single-layered specimens was measured at 15 locations for plane roughness and along five lines for line roughness to evaluate the leveling results. Adopting suitable parameters, color samples with and without leveling were printed for comparison and verification.,According to plane roughness results, forward rotation achieved better leveling. Plane roughness was the major criteria to determine roller speed with the assistance of standard deviation of line roughness. The best parameters of the self-developed MJ color 3-D printer were found to be rolling forward at 1,100 rpm. In addition, printed color samples showed great improvement in surface roughness with leveling and no obvious color mixing after leveling.,Leveling is important to achieve desired layer thickness, smooth surface and good color quality in color 3-D printing. For MJ 3-D printing, only patents were revealed regarding roller design, but paper publications have not been presented. This research practically proposed to use experimental approach to understand the effects of roller operating parameters and to find the suitable ones based on surface roughness results.,This research established the experimental procedures and also suggested guidelines of experimentally obtaining suitable roller leveling process parameters. Developers can refer to this study results to design and adjust leveling mechanism in a new MJ 3-D printer.,The experimental approach can be applied to similar MJ 3-D printing systems if different materials are introduced or the platform speed is changed. The observed trends suggested several guidelines to plan limited experiments only to obtain suitable roller process parameters.