Setting guidelines for co-occurring nanoparticles in water medium.

Abstract This study developed a framework termed as “mixNanohealthrisk” hereafter, for the first time as per literature review, to provide exposure limit or reference dose for co-occurring nanoparticles (NPs) in water for different regions of the world. The effect of interaction of NPs on (i) NP occurrence in environment and (ii) toxic effects were incorporated for estimating NP exposure dose and associated risks (in terms of risk quotient (RQ) and hazard index (HI). Reference dose (RfD) values for SiO2, CeO2, TiO2, Al2O3, Fe2O3, CNT, C60, ZnO and CuO NPs were calculated for the first time in this study based on toxicity studies. RfD values for top three risk-posing nanoparticles when co-occurring together were found to be 0.1 mg/kg/d (CuO), 0.12 mg/kg/d (ZnO) and 0.19 mg/kg/d (TiO2). Calculated maximum allowable concentration values for these nanoparticles were found to be 70.8, 84.4 and 136 mg/L for CuO, ZnO and TiO2 NPs. Exposures to nanoparticles aggregate (ZnO NP + CuO NP) in mixture suspension was found to have allowable ZnO and CuO concentration values of 24.7 mg/L and 175.2 mg/L respectively when present as aggregate. Top three regions identified with highest risk quotient were found to be USA followed by Switzerland and whole of Europe. During use of NP-interaction data for estimating risks, Ag, TiO2 and CuO NPs were found to have lowest maximum allowable concentration values. The identified top three risk-posing NPs can be used for conducting toxicity studies for mixture of NPs and long-term monitoring so that it can be used for setting up guideline concentration values for NPs in mixture for water environment.