Indirect Model Based Estimation of Cutting Force and Tool Tip Vibrational Behavior in Milling Machines by Sensor Fusion
2015
Abstract Real time prediction of cutting tool condition and machined surface finish have been attractive research objectives over the last decades. However, providing practical and reliable solutions is still a demanding task for milling machine tools. One of the most challenging literature goals is to obtain a robust estimation of the cutting forces through indirect sensor measurements since many process and tool related quantities are indirectly linked to cutting forces. Another challenging issue in machining process monitoring and control is prediction of surface finish and quality. As the vibration plays a major role in the surface generation, this can be done by accurate prediction of the vibrational displacements at the tool tip during machining operation. In this paper, a novel model based estimation of cutting force and tool tip acceleration is designed and tested based on data fusion of different sensors measurements. In this context, two sensors (piezoelectric accelerometer and eddy-current displacement both mounted inside the spindle structure) have been utilized to acquire the experimental signals over a wide range of frequencies. In order to predict the above mentioned quantities, an optimal state estimator based on Kalman Filter (KF) is used. The models have been obtained by system identification method based on experimental measurements performed on a machine tool. The model based estimator is fed by real data. The results show that the estimation of the impulse force and tool tip acceleration can be achieved accurately in low and high frequency ranges by assigning different weights to the measurement sensors.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
9
References
14
Citations
NaN
KQI