Analysis of the evolution of potential and free furfural compounds in the production chain of infant formula and risk assessment.

Abstract Furfural compounds are produced during infant formula production when heat treatment is involved. In this study, a robust method was established for determining potential and free furfural compounds (furfural, 5-methyl-2-furfural, 2-acetylfuran and 5-hydroxymethyl-2-furfural) using a modified QuEChERS technique coupled with GC–MS/MS. Further, 36 samples of two batches, covering the whole infant formula production chain were analyzed by the method to investigate how furfurals evolved during process. Then risk assessment was conducted using the Toxtree and T.E.S.T. software and evaluated by hazard quotient. Results showed the contents of bound and free 5-hydroxymethyl-2-furfural demonstrated largest increase during spray-drying (6–11 times) and homogenization stages (12–33 times), respectively. As the sum up of bound and free 5-hydroxymethyl-2-furfural, potential 5-hydroxymethyl-2-furfural was found can cause safety risks in the production chain due to the high hazard quotient value (3.11), indicating it should be controlled in homogenization and spray-drying stages.