Influence of chloride ions and pH level on the durability of high performance cement pastes (Part II)

Abstract The resistance to chemical attack of low water to binder ratio pastes containing silica fume was studied by soaking small paste disks in three different pH controlled solutions, with or without sodium chloride, for periods of up to three months. The pastes were made using water to binder ratios of 0,25 and 0,38. The three solutions in which the paste disks were soaked were the following: 3% NaCl (by weight) at a pH level of 8,5,0% NaCl at 8,5, and 0% NaCl at 4,5. After three months of exposure, the results show that the pH level of the aggressive solution is the most important factor controlling the durability of cement pastes subjected to chemical attack. The total porosity and the depth of decalcification was found to increase with the decrease of the pH level. It was also found that the3water to binder ratio does not significantly affect the deterioration processes, but only influences the kinetics of these processes. The decrease of the water to binder ratio reduces significantly the rate of deterioration. Chloroaluminate crystals were observed only in the cement pastes having a water to binder ratio of 0,38.