Gold coated electrospun polymeric fibres as new electrode platform for glucose oxidase immobilization

Abstract Fibres of poly(methyl methacrylate) were obtained by electrospinning, subjected to coating with a gold layer and then attached on a thin polyethylene terephthalate substrate in order to obtain flexible electrodes for biosensing applications. The morphology of these electrodes, investigated by scanning electron microscopy showed multi-layers of random oriented fibres of approx. 400 nm diameter. The electrochemical characterization of these flexible electrodes was performed by cyclic voltammetry and electrochemical impedance spectroscopy in acid and neutral media, in the absence and in the presence of redox probes, proving their superior performance (e.g. 5-fold current density value) when compared to planar gold electrodes obtained on silicon wafers. The electrodes obtained from conductive electrospun polymeric fibres nets were tested by cyclic voltammetry and amperometry for the detection of hydrogen peroxide with a sensitivity of 0.84 mA cm-2 mM-1 and a detection limit of 20.40 μM. The immobilization of the model enzyme glucose oxidase at the surface of the gold-coated electrospun polymeric fibres electrode was investigated and the obtained biosensor was applied for glucose determination in aqueous solutions by fixed potential amperometry with a sensitivity of 3.10 μA cm-2 mM-1, a detection limit of 0.33 mM, and reduced interferences. Also, the practical applicability of the biosensor was tested for the detection of glucose in artificial sweat and serum samples.