Gaseous and electrochemical hydrogen storage behaviors of nanocrystalline and amorphous Nd-added Mg2Ni-type alloys

Melt spinning technology was used to prepare the Mg2Ni-type (Mg24Ni10Cu2)100−x Nd x (x = 0, 5, 10, 15, 20) alloys in order to obtain a nanocrystalline and amorphous structure. The effects of the spinning rate on the structures and gaseous and electrochemical hydrogen storage behaviors of the alloys were investigated. The analysis of X-ray diffraction (XRD), transmission electron microscope (TEM), and scanning electron microscope (SEM) linked with energy-dispersive spectroscopy (EDS) reveals that all the as-cast alloys hold a multiphase structure, involving the main phase Mg2Ni and some secondary phases such as Mg6Ni, Nd5Mg41, and NdNi. The as-spun Nd-free alloy displays an entire nanocrystalline structure, whereas the as-spun Nd-added alloys hold a nanocrystalline and amorphous structure, and the amorphization degree visibly increases with the spinning rate increasing. The melt spinning ameliorates the hydrogen storage performances of the alloys dramatically. When the spinning rate rises from 0 (the as-cast was defined as the spinning rate of 0 m·s−1) to 40 m·s−1, the discharge capacity increases from 86.4 to 452.8 mAh·g−1, the S 20 (the capacity maintain rate at 20th cycle) value increases from 53.2 % to 89.7 %, the hydrogen absorption saturation ratio (R 5 a , a ratio of the hydrogen absorption quantity in 5 min to the saturated hydrogen absorption capacity) increases from 36.9 % to 91.5 %, and the hydrogen desorption ratio (\(R_{ 1 0}^{d}\), a ratio of the hydrogen desorption quantity in 10 min to the saturated hydrogen absorption capacity) increases from 16.4 % to 47.7 % for the (x = 10) alloy, respectively.