Tribological Properties of TiAl Coating on Aluminum Alloy Surface by Supersonic Particles Deposition
2014
In this study, Gamma TiAl intermetallic alloy protective coating was deposited on the surface of 5803 aluminum alloy by supersonic particles deposition. Researchers observed the surface morphology of the coating by SEM, and researched tribological properties of the substrate material and the coating by CETR friction and wear tester and Talysurf 5P-120 surface morphology tester. The results show that,the bonding mechanism of the Gamma TiAl intermetallic alloy coating and substrate is mechanical interlocking and metallurgical bonding. The abrasion mechanism of Gamma TiAl intermetallic alloy coating is abrasive Wear. The friction coefficients of the coating are all lower than 5083 alumium alloy. The friction volume of coatings reduced 36.7% than 5083 aluminum alloy with the friction loads 50N. TiAl coating has great function to anti-attrition and wearability.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
11
References
0
Citations
NaN
KQI