Design of monoblock dielectric filter using (PbCa)(FeNbSn)O3 ceramics

The microwave dielectric properties of (Pb1-xCax){(Fe0.5Nb0.5)1-ySny}O3 ceramics (0.4 ≤ x ≤ 0.6, y = 0.05, 0.1) and design of 900 MHz band 2-pole monoblock band pass filter (BPF) have been investigated to fabricate BPF. Single-phase specimens having orthorhombic perovskite structure similar to CaTiO3 could be obtained in the compositions of Pb1-xCax){(Fe0.5Nb0.5)1-ySny}O3 (0.4 ≤ x ≤ 0.6, y = 0.05, 0.1). The substitution of Sn for Fe0.5Nb0.5) significantly increased the quality factor Q and slightly decreased the dielectric constant (ɛr). The temperature coefficient of the resonant frequency of 0 ppm °C−1 was realized at x = 0.55 and y = 0.1. The Q · f0 value and (ɛr) for this composition were found to be 8600 GHz and 86, respectively. A monoblock λ/4 dielectric BPF for 900 MHz band portable telephone terminal is presented. This BPF is a kind of combline filter. Computer-aided design (CAD) was used in the modeling procedure. The equivalent circuit of the monoblock BPF is represented by transmission lines and lumped elements based on Zoe and Zoo. A BPF model was designed for surface mounted device (SMD) types. The simulations of the equivalent circuit and BPF structure have been performed to optimize the filter design. Newly developed Pb0.45Ca0.55){(Fe0.5Nb0.5)0.9Sn0.1}O3 dielectric materials were used for BPF fabrication. Experimental results of the fabricated device were in good agreement with the simulation.