Delamination of sodium montmorillonite in PA6 in the presence of melamine polyphosphate
2017
This study describes the influence of melamine polyphosphate (MPP) flame retardant addition on layered structure of virgin sodium montmorillonite (MMT) in PA6/MMT system obtained in extrusion process. It was found that the extrusion of the PA6/MMT binary system in co-rotating twin screw extruder gives intercalated clay nanocomposites, while during extrusion of ternary PA6/MMT/MPP composite, full exfoliation of clay was obtained in the system. Structure of the composites was proved utilizing wide angle X-ray scattering and transmission electron microscopy techniques. Exfoliation of MMT in ternary PA6/MMT/MPP system was also confirmed by rheological studies (viscosity and creep measurements) which were carried out using rotational rheometer. Young's modulus of PA6/MMT/MPP was found to be ~25% greater comparing to PA6/MPP of the same filling level. Cone calorimetry experiments proved decrease of heat release rate peak of PA6/MMT/MPP by ~55% comparing to PA6/MPP with the same total filling level. Copyright © 2017 John Wiley & Sons, Ltd.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
28
References
3
Citations
NaN
KQI