A Numerical and Experimental Study on the Solidification Structure of Fe–Cr–Ni Steel Slab Casting by Roller Electromagnetic Stirring

We present a segmented coupling model for slab casting by roller electromagnetic stirring (R-EMS) of electromagnetic, flow, heat transfer, and solidification behavior based on magnetohydrodynamics and solidification theory. A three-dimensional (3-D) segmented coupling model that included electromagnetic, flow, and heat transfer elements was established using Ansoft Maxwell and ANSYS Fluent software. The effects of the roller sleeve, magnetic shielding ring, coil, core, molten steel, and air domain on the electromagnetic, thermal and flow fields were studied numerically. The accuracy of the model was verified by measuring the magnetic flux density at the centerline in a pair of rollers and the electromagnetic force of the copper plate. Based on the numerical results of the optimal technical parameters, the effect of the R-EMS on the solidification of Fe–17 wt% Cr–0.6 wt% Ni stainless steel was explored. The results indicated that with each additional pair of electromagnetic rollers, the average electromagnetic force increased by 2969 N/m3 in the casting direction, and 5600 N/m3 in the central section of the rollers. With increasing number of pairs of rollers, the effective stirring region increased, and the velocity of molten steel at the solidification front first increased but then decreased. The strong electromagnetic swirling washing effect reduced the solidification rate of the slab shell and promoted the superheated dissipation of molten steel in the center of the strand. The center equiaxed crystal ratio of the slab was improved to 69% with two pairs of R-EMS rollers and electromagnetic parameters of 400 A/7 Hz, which was beneficial for obtaining a uniform and dense solidified structure to improve the subsequent hot working performance and product quality.