Study on friction characteristics of sliding interface of feed system

The serious friction caused by the fluctuation of friction occurs when start-up and will reduce the positioning accuracy of the servo axes of high precision machine tools, the purpose of this paper is to study the friction fluctuation characteristics of friction coefficients between interfaces under different working conditions.,HT200 and 45# materials were experimentally studied by friction and wear testing machine UMT-3, the variation of friction coefficient under different working conditions (different start-up conditions, the variation of lubrication state area and different roughness) were measured.,The results show that the larger start-up acceleration shortens the pre-sliding time of the interface friction, makes the friction coefficient decrease faster, reduces the mixed lubrication area of the contact surface and makes the contact surface reach the stable lubrication state quickly. It can be concluded that the larger roughness surface will lead to the larger mixed lubrication area, the larger static friction coefficient and the larger drop between static and dynamic friction coefficient and easy to cause friction vibration.,The results reveal the friction fluctuation rule of the metal interface during the different start-up process, which is of guiding significance to reveal the lubrication principle and mechanism of the mechanical interface.,The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2019-0482/