Hot Deformation Behavior of a Co-Spray-Formed Al-Si/7075 Bimetallic Gradient Alloy
2021
In this paper, we report the results obtained from the hot compression behaviour of co-spray-formed Al-Si/7075 bimetallic gradient alloys by investigating the five selected layers divided evenly from top to bottom. It was found that with a decrease in the strain rate and an increase in temperature, the hot compression flow stress of deposited alloys decreases gradually, as expected. The relationship between flow stress, temperature and strain rate follows the Arrhenius relationship. The deformation activation energy of the co-spray formed gradient alloy gradually increases from bottom to top in the height direction, which are 100.15, 167.35, 185.54, 208.78 and 220.83 KJ/mol, indicating that the degree of difficulty in the deformation of the alloy is affected by changes in the silicon content of the alloy. Finally, the flow stress constitutive equation is calculated for each layer of alloy material, which is instructive for the subsequent study of the densification process of co-spray-formed gradient alloys.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI