Phototriggering system for an ultrahigh-speed video microscopy

A phototrigger system is developed as a part of a video microscope mounting an ultrahigh-speed video camera capable of image capturing at frame rates as high as 1×106frames∕s. The extremely high frame rate is achieved by implementing in situ image storage. A distinguished feature of the camera is the on-chip overwriting mechanism that allows to keep in storage the latest image sequence of 103 frames; the old signals are continuously drained out of the storage. The trigger system is designed to synchronize recording operations with an occurrence of a target event within the limited image capturing duration. The target event is detected through a sudden change in the output of a sensor mounted to an optical port of the microscope. To reduce noise contribution, a two-sensor architecture is implemented. One sensor detects the target event while the one produces a reference signal used for noise reduction. Both sensors are connected to the same optical port by using a specially designed beam splitting unit. To...