Nonlinear pull-in instability of carbon nanotubes reinforced nano-actuator with thermally corrected Casimir force and surface effect
2016
Abstract An analytical model of investigating the pull-in characteristics of CNTs reinforced nano-actuator with temperature-dependency subjected to coupled electrostatic loading, dispersion forces as van der Waals and thermally corrected Casimir force, and surface stress are derived based on von Karman׳s geometric nonlinearity and surface elasticity. The results illustrate that increment of volume fraction of CNTs enhances the structural stiffness and leads to the increases of pull-in voltage of CNTs reinforced nano-actuator; the growth of temperature increases the axial compression stress and thus decreases the pull-in voltage; and free-standing behavior depends on the characteristic scale of the CNTs reinforced nano-actuator. The doubly-clamped and doubly-supported configuration of nano-actuator are considered and the pull-in voltage of doubly-clamped nano-actuator is larger than that of doubly-supported type. Casimir force with thermal correction significantly depends on the temperature and initial gap between electrodes. The results show the difference between Casimir force with and without thermal correction is small within couples of nanometers gap but the effect of Casimir force on pull-in instability of CNTs reinforced nano-actuator cannot be neglected.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
61
References
22
Citations
NaN
KQI