Localised corrosion initiation and microstructural characterisation of an Al 2024 alloy with a higher Cu to Mg ratio
2012
Abstract An Al 2024 (AA2024-T351) alloy having less Mg and a higher proportion of Cu to Mg (mass ratio ≈3.7) has been characterised to provide input data for microscale and macroscale corrosion models. The Al 2024 alloy microstructure has a significant presence of nanoscale dispersoid and microscale AlCuFeMnSi (2nd phase) intermetallic particles, but a smaller population of microscale S phase (Al 2 CuMg) and θ phase (Al 2 Cu) intermetallic particles. Microscale electrochemical data show that pitting potential (SCE) values for 2nd phase, S phase, or matrix overlap significantly. The localised corrosion susceptibility is affected by S and inhomogeneous 2nd phase particles.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
27
References
55
Citations
NaN
KQI