Introduction of one efficient industrial system for turpentine processing wastewater reuse and treatment

Abstract Wastewater treatment is one important issue for turpentine plant and more wastewater generated by greater turpentine processing will prevent its further development. To solve this issue without extra place and new equipment, one industrial system for reuse and treatment of turpentine processing wastewater was introduced for the first time. For wastewater reuse, the technology was simple and easy to control that after neutralization by lime and absorption with activated carbon (optional, mostly not necessary), the wastewater could be reused for turpentine processing. After reuse, the wastewater was further treated by a biological system. During long-term application of wastewater reuse in this plant, it showed little influence on the products performance (mainly acid value) and final wastewater COD. Base on above advantages, the plant could decide when for wastewater drainage, and thus the amount of wastewater was reduced greatly. For the biological treatment, the COD of wastewater could be degraded to suitable level stably and the wastewater after treatment could be applied for daily life in the plant. Overall, considering the cost, operation, and performance, the whole system shows great potential and possibility of industrial application and therefore can be applied widely in the turpentine processing industry.