In-situ gradient formation by direct solid addition of buffer components.

Buffer preparation and storage requires a significant facility footprint in large scale bioprocessing and together with the costs of supply chain management can have a substantial economic impact. In-line buffer mixing in chromatography is commonly performed by blending different buffer solutions using at least two pumps and a static or dynamic mixer. We developed a device for an in-line gradient delivery of buffering agents directly from solids to be applied for chromatographic separation processes. A solid feeding device with a screw conveyor and a hold tank for the solids was designed and a miniaturized system was 3D printed. The coefficient of variation for the precision of the solid feeding of 5 different buffering agents was below 5% even for very small solid flow rates necessary for lab-scale chromatography. Stability was demonstrated by a constant linear solid feed at a very low dosing rate of 0.05 g.min-1 over 24 hours. We demonstrated the suitability for chromatography by directly connecting the system to a standard chromatography workstation for protein chromatography. The solids were fed into a miniaturized continuously stirred tank reactor connected to an AKTA purification system. The performance of the in-line gradient delivery of buffering agents directly from solids was compared to conventional in-line buffer mixing. We were able to achieve highly linear gradients for elution using only one pump of a chromatographic system, generating the gradient by the direct addition of solids avoiding the necessity of additional pumps and hold tanks. By direct conditioning of buffers and the addition of solids a simple, just in time, at site preparation of buffers was possible. The design of the feeding unit for solid addition for buffer preparation is easily scalable and adaptable to work with or as a replacement for already existing in-line dilution or conditioning units.