Tritium release and retention in beryllium and titanium beryllide after neutron irradiation up to damage doses of 23-38 dpa

Abstract Titanium beryllide is considered as an advanced neutron multiplier in the Helium Cooled Pebble Bed (HCPB) blanket of DEMO. Neutron irradiation of titanium beryllide together with beryllium as a reference material in material testing nuclear reactors can give essential data for the DEMO blanket design. Be-7at.%Ti (Be-7Ti) as well as Be were irradiated in the HFR, Petten, the Netherlands, at four temperatures of 710, 800, 940, 1040 K up to 23, 31, 36, 38 dpa, respectively. The post-irradiation examination (PIE) included thermal-programmed desorption (TPD) and Vickers hardness tests as well as microstructure study by optical metallography. Be and Be-7Ti pellets maintained their integrity after irradiation. Microstructure of Be-7Ti contains two phases, mainly, TiBe12, and also small amount of Be. Under irradiation, gas bubbles were formed in Be samples as well as in Be-phase in Be-7Ti samples. These bubbles contain helium and tritium produced in Be under irradiation. TPD tests showed a much lower tritium retention in Be-7Ti than in Be for all four irradiation temperatures. Vickers hardness of TiBe12 phase is much higher than that of Be-phase. According to the obtained data, Be-7Ti could be considered more preferred than Be as a neutron multiplier material in future fusion reactors due to the enhanced radiation damage resistance.