Fibrous roller-compacted concrete with recycled materials – feasibility study

This paper presents fundamental work done to enable fibre reinforcement of roller-compacted concrete (RCC). Procedures for mixing and casting two types of steel fibres in RCC were developed. Fresh properties, uniaxial compressive and bending behaviour were examined in a pilot study dealing with cement content, fibre type and dosage. It was found that different fibre types and dosages require different moisture contents. It is concluded that low cement content (less than 300 kg/m3) steel-fibre-reinforced roller-compacted concrete (SFR-RCC) mixes do not have sufficient paste and are prone to fibre agglomeration, hence SFR-RCC mixes richer in paste and at optimum moisture content are recommended. Mixes with cement content of 300 kg/m3 coped better with fibre reinforcement. Despite causing some loss in compressive strength, fibres help enhance the flexural performance and even SFR-RCC mixes with recycled masonry and concrete aggregates performed equally well as natural aggregate mixes. A full-scale trial has ...