OCCUPATIONAL EXPOSURE TO CARBON BLACK IN ITS MANUFACTURE

: Carbon black is manufactured by the vapour phase pyrolysis of heavy aromatic hydrocarbon feedstocks. Its manufacture is worldwide and the majority of its production is for use in the rubber industry especially tyre manufacture. Its carbonaceous nature has led many to investigate the occurrence of exposure-related medical conditions. To quantify any such relationships, it is necessary to assess exposure accurately. As part of such an epidemiological investigation survey involving the measurement both of respirable and of total inhalable carbon black was undertaken in 18 plants in seven European countries between mid-1987 and mid-1989. A total of 1298 respirable samples (SIMPEDS cyclone) and 1317 total inhalable samples (IOM head) were taken and deemed of sufficient quality for inclusion in the study. The distributions of the time-weighted average values were assessed and found to be best described by a log-normal distribution, and so exposure is characterized by geometric means and standard deviations. The data are presented in terms of 13 separate job titles for both dust fractions and shows a wide variation between job titles, with the highest mean exposure experienced by the site cleaners, and 30% of the samples taken from the warehouse packers being in excess of the relevant countries' occupational exposure limits for total inhalable dust. The quality and extent of this data allows both for comparison with exposure standards and for generation of occupational exposure indices, which will be presented in another paper (Gardiner et al., in preparation).