A Modified Feeding Plate for a Newborn with Cleft Palate

Objectives: Cleft palate is a common congenital maxillofacial defect. We wish to present the fabrication of a modified feeding plate that will adapt to the changing palatal and velopharyngeal morphology during function. Case Report: A neonate with unilateral cleft lip and palate was referred to our clinic for the fabrication of a feeding plate. Intraoral examination revealed a cleft involving the uvula and the soft palate, with an alveolar defect on the left side. An impression was taken and a dental cast was obtained. A 1-mm Bioplast clear soft plate was pressed on the model. After trimming the edges of the plate, several retentive holes were made for its attachment to the hard plate. With the Bioplast soft plate replaced on the cast, plaster was used to cover parts of the soft plate that were not to come in contact with the hard plate. Biocryl resin was put on the retentive holes and 2-mm Biocryl C Rosa-transparent plate was pressed. The edges of the plate were cut, trimmed, and polished. Conclusion: Th...