Process for the production of an encapsulated optocomponent, mold for encapsulation of an optocomponent and pressure device for mold

In manufacturing an encapsulated optocomponent, the optocomponent is embedded in a plastics material. The optocomponent has guide grooves on one of its surfaces in which guide pins are to extend so that the encapsulated optocomponent will obtain an optical interface of standard type. For the encapsulating operation guide pins are placed in a mold cavity of a mold half and the optocomponent is placed in the cavity of the mold, so that the guide pins are engaged in the guide grooves and are accurately inserted therein. To achieve this effect, a resilient or elastic force, such as from a plunger, is applied to the other side of the optocomponent, so that it is pressed with some force against the guide pins. The cavity in the mold is then closed by placing a second mold half on top after which the encapsulating material can be introduced in the closed cavity of the mold. The elastic force can also be obtained directly from a leadframe, to which the optocomponent is attached for electrical connection, or from a small elastic part, placed in the cavity of the mold.