Properties of large area ErBa2Cu3O7−x thin films deposited by ionized cluster beams
1991
ErBa2Cu3O7−x films have been produced by simultaneous deposition of Er, Ba, and Cu from three ionized cluster beam (ICB) sources at acceleration voltages of 0.3–0.5 kV. Combining ozone oxidation with ICB deposition at 650 °C eliminated any need of post anneal processing. The substates were rotated at 10 rotations per minute during the deposition which took place at a rate of about 3 to 4 nm. ErBa2Cu3O7−x films with areas up to 70 mm in diameter have been made by ICB deposition. These films, 100‐nm thick, were deposited on SrTiO3(100) substrates at 650 °C in a mixture of 6 at. % O3 in O2 at a total pressure of 4×10−4 Torr. They had Tc ranging from 84.3 to 86.8 K over a 70 mm diameter and Jc above 106 A/cm2 at 77 K. Another set of three samples, deposited within a 50 mm diameter, was examined by magnetization measurements. These samples had Jc ranging from 8.2×106 to 1.1×107 A/cm2 at 4.2 K and from 2.4×105 to 5.1×105 A/cm2 at 70 K. X‐ray diffraction measurements of the three samples showed preferential c‐ax...
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
1
References
3
Citations
NaN
KQI