졸-겔법에 의해 합성한 리튬 코발트 산화물의 열처리 온도와 시간에 따른 전기 화학적 특성

2014 
$LiCoO_2$ 는 박막전지의 양극재료로써 많은 관심을 받고 있는 물질이다. 본 연구에서는 졸-겔 스핀코팅공정과 열처리 과정을 거쳐 Au 금속 지지체 위에 $LiCoO_2$ 박막을 합성하였으며, 열처리 온도와 열처리 시간에 따른 $LiCoO_2$ 박막의 전기 화학적 성질을 고찰하였다. 합성된 박막의 물리화학적 성질은 X-선회절분석기(XRD), 전자현미경(SEM)과 원자간력현미경(AFM)에 의해 조사하였으며 전기화학적 특성분석을 위하여 galvanostatic법을 이용하여 충 방전 사이클 특성도 조사하였다. X-선 회절 결과로부터 $550^{\circ}C$ 와 $750^{\circ}C$ 지지체 위에 성장된 박막은 각각 스피넬구조와 층상 암염구조를 갖는다. $750^{\circ}C$ 에서 10분과 30분 열처리한 시료의 RMS 조도와 입자의 크기는 큰 차이를 보이지 않았으나, 120분 열처리한 시료는 RMS 조도의 증가, 입자크기의 증가 그리고 세공이 관찰되었다. $750^{\circ}C$ 에서 10분, 30분, 120분 열처리한 $LiCoO_2$ 박막의 방전용량은 각각 54.5, 56.8, $51.8{\mu}Ah/cm^2{\mu}m$ 이고 50회의 충 방전 후의 방전용량 복원률은 97.25, 76.69, 77.19 %이다. 【$LiCoO_2$ thin film have received attention as cathodes of thin-film microbatteries. In this study, $LiCoO_2$ thin films were synthesized on Au substrates by sol-gel spin coating method and electrochemical properties were investigated under annealing temperature and time. The phycochemical properties of $LiCoO_2$ thin film were investigated by X-ray diffraction, scaning electron microscopy and atomic force microscopy. The electrochemical properties were characterized using galvanostatic charging/discharging cycling tests. From X-ray diffraction, as-grown films annealed at $550^{\circ}C$ and $750^{\circ}C$ are presumed to be spinel structure and a single phase of the layered-rock-salt, respectively. The RMS roughness and grain size of the films which annealed at $750^{\circ}C$ has similar values for annealing time 10 and 30 min, while for annealing time 120 min surface roughness, grain size increase and pore appearance were observed. The first discharge capacity of $LiCoO_2$ thin films annealed at $750^{\circ}C$ for 10, 30 and 120 min is about 54.5, 56.8 and $51.87{\mu}Ah/cm^2{\mu}m$ , respectively. Corresponding capacity retention at 50th cycle is 97.25, 76.69, 77.19%.】
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    0
    References
    0
    Citations
    NaN
    KQI
    []