Changes in nitrogen removal and microbiota of anammox biofilm reactors under tetracycline stress at environmentally and industrially relevant concentrations

Abstract Anammox-related processes are often applied for the wastewater treatment which contains both ammonium and antibiotics. Herein, the long-term effects of tetracycline (TC), at environmentally and industrially relevant concentrations, on the performance, anammox activity and microbial community of anammox reactors were investigated for 518 days. The control reactor (without TC exposure) was stable for nitrogen removal during the long-term operation (a nitrogen removal rate of 0.56 ± 0.05 kg-N·m −3 ·d −1 ). In the TC-added reactor, the nitrogen removal efficiency increased slightly at low TC levels (1–100 μg/L), whereas poor anammox performance occurred at high TC concentration (1000 μg/L). Furthermore, the concentrations of extracellular polymeric substances (EPS) were much higher at 10 μg/L than those in the control reactor ( P c contents. Consistently, exposure to TC changed the abundance of anammox bacteria, e.g., an increase in Candidatus Jettenia abundance occurred from 2.20 ± 0.97% (0–10 μg/L) to 12.13 ± 1.66% (100 μg/L). Similarly, the genus Denitratisoma , the most predominant denitrification bacteria, also had a higher abundance at a TC concentration of 100 μg/L (15.60 ± 6.42%) than other TC concentrations (5.40 ± 2.50% and 7.65 ± 0.55% at concentrations of 10 and 1000 μg/L, respectively). The results can explain why the exposure of anammox bacteria to a lower TC concentration (100 μg/L) resulted in a better nitrogen removal rate. In contrast, exposure to a high TC level (1000 μg/L) led to a decline in the abundance of anammox bacteria and denitrifiers (1.53 ± 0.64% and 8.18 ± 0.63%, respectively) but an increased abundance in the nitrifier population (8.07 ± 1.21%; P   0.01). Therefore, this study can aid in the design and operation of anammox-based processes treating sewage and industrial wastewater.