Structural Colors Based on Amorphous Arrays Comprised Solely of Silica Particles

In this study, structural colors were fabricated by producing an amorphous array with atypical silica particles. The colors were controlled by an array of silica particles with different sizes. In previous research, the process required inducement of the amorphous array, which was complex. Meanwhile, in this paper, we proposed a simple one-step process. First, spherical silica nanoparticles were synthesized using the sol-gel process of the Stober method. Atypical silica particles that induced an amorphous array were produced by adding a small amount of phenol-formaldehyde resin. Subsequently, the colloidal silica was converted to a powder using a convection oven. The characteristics of the synthesized silica particles were confirmed using a scanning electron microscope (SEM). All the synthesized silica powders obtained structural colors. Finally, the silica powders were dispersed in deionized (DI) water and coated on a glass slide. We confirmed that the silica particles showed different structural colors depending on the size of the particles. We also found that the color was highly independent of the viewing angle.