Heterogeneity of carbon fibre

Abstract A range of polyacrylonitrile (PAN) and pitch based carbon fibre types (high, standard and intermediate modulus fibres) have been characterised using both physical and chemical techniques, the results highlighting the heterogeneity of the fibre. Nano-indentation showed variation in stiffness between different fibres of the same type as well as variation along a 20 μm length of a single fibre. Tensile tests showed variance of approximately 25% in tenacity for three different carbon fibre types but less variability in modulus with values from 8% to 19%. Raman spectroscopy showed variation in the graphitic content both between fibres of different origin as well as variation, with 0.5 μm spatial resolution, along the length of a single fibre. Inverse gas chromatography surface energy measurements of larger samples of fibres were carried out using the novel approach of incremental surface coverage by varying the probe molecule concentration and revealed different levels of energetic heterogeneity for PAN based fibres collected at different stages of carbon fibre production. The heterogeneity of the unoxidised fibres (collected after carbonisation) was restricted to about 15% of the fibre surface whereas the surface oxidised fibre sample (collected after the electrolytic oxidation bath) was heterogeneous over more than 30% and the sized fibres were shown to be quite homogeneous.