A pseudo fixed switching frequency 2kHz/A in optimum on-time control buck converter with predicting correction technique for EMI solution
2014
This paper repots an optimum on-time (OOC) control with predicting correction technique (PCT) for ripple-based buck converter. The switching frequency (F
SW
) variation is analyzed with completely considering the parasitic resistances of the components and devices. The proposed converter achieved nearly constant switching frequency over a wide load range without extra clock controlled circuits and current sensing circuits. The parameters of the parasitic resistances almost cause no influence and no restriction on F
SW
performance. Actually, only the input voltage is necessary to predict the optimum on-time, and this work benefits the decease on total pin numbers. The simulation results demonstrate 0.375% ΔF
SW
/F
SW
and 2kHz/A ΔF
SW
/ΔI
LOAD
over 1.5A load current change. Consequently, pseudo constant F
SW
with known noise spectrum strongly benefits the solution of electromagnetic interference (EMI) issue for system-on-chip (SoC).
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
5
References
5
Citations
NaN
KQI