Numerical simulation of vortex-induced vibration of long flexible risers using a SDVM-FEM coupled method

Abstract This paper presents a grid-independent numerical methodology that couples the strip theory based discrete vortex method (SDVM) with the finite element method (FEM) to simulate the vortex-induced vibration (VIV) of a long flexible vertical riser. Based on the strip theory, a three-dimensional flow filed is approximately simulated by a series of computational ‘flow strips’. A Lagrangian discrete vortex method is employed to numerically solve the unsteady vorticity transport equations of each ‘flow strip’. The flexible riser is modelled as a tensioned Bernoulli-Euler beam with the dynamical equation solved by the finite element method in time domain. The two-dimensional DVM code is firstly validated for the VIV simulation of a rigid cylinder that was experimentally studied by Khalak and Williamson (1996). Referring to two typical experimental configurations of Lehn (2003) and Chaplin et al. (2005), the VIV of a long flexible riser immersed in a uniform and stepped incoming flow are numerically simulated, respectively. A good agreement was achieved through detailed comparisons between the present numerical prediction and the experimental data, including the structural in-line and cross-flow VIV response modes, root mean square amplitudes and the dominant frequency. The occurrence of standing and travelling wave responses, dual resonance between in-line and cross-flow motions and figure-eight trajectory are reported. The wake patterns corresponding to two response waves are also presented and investigated. Related to structural local vibration amplitude, two principle vortex patterns resembling the ‘2S’ and ‘2P’ modes are identified in the wake. The standing wave component of structural response determines the vortex shedding pattern. The travelling wave component affects the spanwise vortices shedding at different phases.