Vertical and Orovestibular Forces Generated by Beta-Titanium and Stainless-Steel Rectangular Wires in Labial and Fully Customized Lingual Bracket Systems

This study aimed to investigate the force values exerted from rectangular wires when combined with conventional labial and fully customized lingual appliances under predefined, idealized activation. Fully customized lingual brackets of two brands Incognito™ (3M Unitek, Monrovia, MN, USA) and WIN (DW Lingual Systems, Bad Essen, Germany) and labial brackets of another brand, discovery® MIM and discovery® smart systems (Dentaurum, Ispringen, Germany), were chosen. Stainless-steel and beta-titanium wires of 0.018” × 0.025” were examined. For IncognitoTM, 0.0182” × 0.025” beta-titanium wires were tested. Intrusion/extrusion and orovestibular movements were performed in a range of 0.2 mm, and the forces were recorded for each 0.1 mm of the movement. Mean values and standard deviations were calculated for all measurements, and ANOVA was performed for statistical analysis. Slight differences were observed between the forces generated from beta-titanium and stainless-steel wires. The same wire generated in some cases 5–53% higher forces with the lingual appliance due to the vertical orientation of the long walls during intrusion/extrusion and increased wire stiffness at the anterior region. Beta-titanium and stainless-steel 0.018” × 0.025” wires can generate similar force values during the final stages of the orthodontic therapy; thus, possibly only one of the two alloys could be used in each orthodontic wire sequence.