Welding Slag Clear Machine with Kinematic Linkage Indexer

Welding slag is a form of slag or vitreous material produced as a byproduct of some arc welding processes, most specifically Shielded metal arc welding , Submerged arc welding, and Flux-cored arc welding.Slag is the leftover remains of the weld process that is a result of the flux having done its job. Slag is formed from the flux, decomposing into either a shielding gas, or deoxidizers, which form molten compounds that cover the weld while it cools to prevent oxidation of the freshly formed weld. (Welding flux is a combination of carbonate and silicate materials used in welding processes to shield the weld from atmospheric gases. When the heat of the weld zone reaches the flux, the flux melts and out gasses. The gases produced push the atmospheric gas back, preventing oxidation. ) Slag is great for protecting the weld while it cools, but once it has done its job, it has to be removed before the next pass. So, there are many ways to remove welding slag, but the most common method in years past was with a Chipping Hammer. But chipping hammer can damage the weld face leaving tiny marks where the weld can fail. The chipping hammer is great for general purpose welding, when combined with a wire brush, results are generally good. ….hence there is need of a special purpose machine to remove slag from welded components.