INFLUENCE OF THERMAL RESISTANCE OF AIR CONDENSER TUBES ON STEAM COOLING EFFICIENCY

The research is carried out using a mathematical model of conditions and features of condensation processes with the influence of changes in internal and external thermal resistances of working bodies, which occur during contamination of outside and inside metal pipes of heat exchange surfaces of air condenser. capacitor. Particular attention is paid to the selection, detailing and determination of more than twenty basic parameters that characterize the operation of the direct cooling unit of the condensing unit for the summer, the conditions of heat transfer processes between the working bodies taking into account the finned outer surface of elliptical condenser tubes. The results of experiments on the mathematical model are analyzed and the influence of the incoming air velocity and ambient temperature on the output steam pressure in the condenser direct air cooling system within the change of internal and external thermal resistances in the range 0-0.001(m2·K)/W due to cooling tube contamination is determined. air condenser steam turbine installation. Conditions, character and features of influence of thermal resistance of pollution in cooling tubes on steam pressure at an exit from them are defined, the basic factors defining steam pressure at an exit, necessity of the organization of control of thermal resistance of pollution in a pipe during unit operation at variable operating conditions and expediency is substantiated. conducting test studies of operating modes while taking into account the influence of thermal resistance of external and internal pollution on the thermal efficiency of the cooling unit. Studies have shown that at a fixed value of the heat load of the exhaust steam, the pressure of the steam outlet increases with increasing ambient temperature and decreasing the speed of the incoming air.