Constructing the Bridge from Isotropic to Anisotropic Pitches for Preparing Pitch-Based Carbon Fibers with Tunable Structures and Properties
2020
Synthetic naphthalene pitches (SNPs) with isotropy and anisotropy were prepared by a simple thermal polycondensation method to fabricate pitch-based carbon fibers. The structural characteristic, thermal stability, phase-separation behavior, and melt-spinnability of the SNPs and the structural properties of the derived carbon fibers were systematically investigated. The results show that spinnable SNPs with controllable mesophase contents ranging from 0 to 100 vol % and softening points (210-290 °C) could be easily obtained by a nitrogen-bubbling treatment to improve their thermal stability and melt-spinnability by avoiding the phase separation of liquid crystal (LC) in the pitch. An experimental phase diagram of spinnability and mesophase content is newly proposed for predicting the spinnability of a mesophase-containing pitch. The LC has a significant influence not only on the constituents, structure, and physical properties of the SNPs but also on the final structure and properties of the corresponding pitch-based carbon fibers. The low ash content (less than 0.15 wt %) in the pitch precursor is found to have no obvious effect on the pitch spinnability and the mechanical properties of derivative large-diameter carbon fibers.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
43
References
5
Citations
NaN
KQI