Deep learning-augmented radioluminescence imaging for radiotherapy dose verification.

Purpose We developed a novel dose verification method using a camera-based radioluminescence imaging system (CRIS) combined with a deep learning-based signal processing technique. Methods The CRIS consists of a cylindrical chamber coated with scintillator material on the inner surface of the cylinder, coupled with a hemispherical mirror and a digital camera at the two ends. After training, the deep learning model is used for image-to-dose conversion to provide absolute dose prediction at multiple depths of a specific water phantom from a single CRIS image under the assumption of a good consistency between the TPS setting and actual beam energy. The model was trained using a set of captured radioluminescence images and the corresponding dose maps from the clinical treatment planning system (TPS) for the sake of acceptable data collection. To overcome the latent error and inconsistency that exists between the TPS calculation and the corresponding measurement, the model was trained in an unsupervised manner. Validation experiments were performed on five square fields (ranging from 2 × 2 cm2 to 10 × 10 cm2 ), and three clinical IMRT cases. The results were compared to the TPS calculations in terms of gamma index at 1.5 cm, 5 cm and 10 cm depths. Results The mean 2% / 2mm gamma pass rates were 100% for square fields and 97.2% (range from 95.5% to 99.5%) for the IMRT fields. Further validations were performed by comparing the CRIS results with measurements on various regular fields. The results show a mean gamma pass rate of 91% (1% / 1mm) for cross-profiles and a mean percentage deviation of 1.15% for percentage depth doses (PDDs). Conclusions The system is capable of converting the irradiated radioluminescence image to corresponding water-based dose maps at multiple depths with a spatial resolution comparable to the TPS calculations. This article is protected by copyright. All rights reserved.