Scatterometry based overlay metrology
2008
With the advancement of lithography, the overlay budget is becoming extremely tight. As the accuracy of overlay is
important for achieving a good yield, the demand for the accuracy of overlay is ever increasing. According to the
International Technology Roadmap for Semiconductors (ITRS), the overlay control budget for the 32nm technology
node will be 5.7nm. The overlay metrology budget is typically 1/10 of the overlay control budget resulting in overlay
metrology total measurement uncertainty (TMU) requirements of 0.57nm for the most challenging use cases of the 32nm
node. The current state of the art imaging overlay metrology technology does not meet this strict requirement, and further
technology development is required to bring it to this level. Especially for exposure tool inspection (e.g. alignment,
overlay, wafer stage and distortion), more high accuracy should be required using 'resist to resist' pattern.
In this work we simulated the measurement sensitivity for two types of scatterometry based overlay metrology, one is
differential signal scatterometry overlay (SCOL), the other is double exposure type (DET).
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI