Processability, morphology and mechanical properties of wood flour reinforced high density polyethylene composites

AbstractWood flour reinforced high density polyethylene (HDPE) composites have been prepared and their rheological properties measured. The melt viscosity decreased as the processing temperature increased and the wood flour content decreased. A power law model was used to describe the pseudoplasticity of these melts. Adding wood flour to HDPE produced an increase in tensile strength and modulus. Composites compounded in a twin screw extruder and treated with a coupling agent (vinyltrimethoxysilane) or a compatibliser (HDPE grafted with maleic anhydride) exhibited better mechanical properties than the corresponding unmodified composites because of improved dispersion and good adhesion between the wood fibre and the polyalkene matrix. Scanning electron microscopy of the fracture surfaces of these composites showed that both the coupling agent and compatibiliser gave superior interfacial strength between the wood fibre and the polyalkene matrix.