Analysis of the Morphological Development of PBT/ABS Blends during the Twin Screw Extrusion and Injection Molding Processes

Abstract The aim of this work was to observe the development of the phase morphology of the PBT/ABS blends during their extrusion mixing and injection molding steps. The evolution of the blend morphology during the mixing stage was analyzed using a specially designed co-rotational twin-screw extruder with a collecting device located along the barrel. Blend samples were collected in-line along the length of the extruder barrel during the blending process. Samples obtained from the extruded pellets and from injection molded specimens were also used to observe the blend morphology. All the samples were observed by transmission electron microscopy (TEM). They were prepared by cryo-ultramicrotomy and the rubbery phase of the ABS contained in the blends was stained with osmium tetroxide (OsO4). A special function was established and is proposed to analyze the blend morphology trends through image analysis. In binary blends, the ABS phase showed better dispersion after the mixture passed through the extruder die...