A new strategy to activate liquid crystal polymer samples for electroless copper deposition

In order to activate the polymers for electroless copper deposition, an alternative way of sample preparation is demonstrated. The samples are prepared by incorporation of a small amount (<1 wt %) of palladium, nickel, or copper acetate into the molten Liquid Crystal Polymer (LCP) in a blender. Since the blending temperature is kept higher than the decomposition temperature of acetates, the acetates are thermally decomposed during blending, leading to the metallic Pd, Ni, or Cu which are used as activators for electroless deposition. After preparing the samples, electroless copper deposition is successfully realized. The influence of different acetates (Pd, Ni, or Cu acetates) on the deposition is investigated. The copper amount is higher and the deposition kinetics is faster on LCP samples with 0.15 wt % Pd and 0.4 wt % Ni than that with 0.4 wt % Cu. The deposited copper layers are uniform and oxide-free. Moreover, the possibility to substitute expensive Pd activator by cheaper Ni or Cu is shown. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 44397.