Material rack conveyor
2013
The utility model relates to the field of production of silicon wafers and discloses a material rack conveyor. The material rack conveyor comprises two sectional materials, two pairs of end bases, two rotating shafts, two pairs of belt wheels, two conveyor belts and a drive assembly. The sectional materials are the same in length and arranged on a work table in parallel; each pair of the end bases is oppositely arranged at the two ends of the corresponding sectional material, and each end base is provided with a bearing block; each rotating shaft is installed on the bearing blocks of two end bases located at the same end of the sectional materials through bearings in a crossing mode, and the rotating shafts are perpendicular to the sectional materials in the axial direction; each pair of the belt wheels is oppositely distributed and mounted on the two rotating shafts; each conveyor belt is wound around the same pair of the belt wheels in a crossing mode; the drive assembly is connected with the rotating shafts and drives the rotating shafts to rotate. Because of a conveying frame formed by the sectional materials and the end bases and a conveying mode achieved through the belt wheels and the conveyor belts, the drive assembly drives the conveyor belts to move so that a material rack can be conveyed, good stationarity is achieved, and the situation that due to the fact that the material rack falls off, the silicon wafers are damaged is prevented.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI