Blistering in ALD Al2O3 passivation layers as rear contacting for local Al BSF Si solar cells

2012 
Abstract Random Al back surface field (BSF) p-type Si solar cells are presented, where a stack of Al 2 O 3 and SiN x is used as rear surface passivation layer containing blisters. It is shown that no additional contact opening step is needed, since during co-firing local Al BSFs are induced at the location of these blisters. The best fill factors and short circuit currents are obtained in the case of (i) a hydrophobic pre-passivation cleaning, since it leads to a small density of larger blisters, and (ii) 10 nm of Al 2 O 3 , where the blistering size still increases during firing thanks to additional out-gassing. There is an apparent gain in J sc and V oc of, respectively, 1.3 mA/cm 2 and 5 mV for the best random Al BSF cells compared to full Al BSF reference cells, because of better rear internal reflection and rear surface passivation.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    17
    References
    36
    Citations
    NaN
    KQI
    []