Alumina, Zirconia and Their Composite Ceramics with Properties Tailored for Medical Applications

Although in 1977 the first ceramic composite material had been introduced into the market, it was a long time before composite materials were qualified for medical applications. For a long period high purity alumina ceramics have been used as ball-heads and cups. Because of their brittleness, in 1986 yttria stabilized zirconia has been introduced into this application, because of higher strength and fracture toughness. However, due to its hydrothermal instability this material disappeared in orthopaedic applications in 2000. Meanwhile a composite materials based on an alumina matrix with dispersed metastable tetragonal zirconia particles and in-situ formed hexagonal platelets became the standard material for ceramic ball-heads, because of their excellent mechanical strength, hardness and improved fracture toughness. Especially fracture toughness can be improved further by special material formulations and tailored microstructure. It has been shown that a mixed stabilisation of zirconia by yttria and ceria with dispersed alumina and hexagonal platelets overcomes the hydrothermal instability and excellent materials properties can be achieved. Such materials do have big potential to be used in dental applications. Furthermore, these materials also can be seen as a new generation for ball-heads, because of their enhanced fracture toughness. All materials are described within these articles. In order to achieve the required properties of the materials, special raw materials are required. Therefore, it is quite important to understand and know the raw material manufacturing procedures.