Evaluation of Orientation Performance of Attention Patterns for Blind Person.

: Tactile walking surface indicators (TWSIs) are installed on footpath to support independent travel for the blind. There are two types of TWSIs, attention patterns and guiding patterns. The attention pattern is usually installed at the crosswalk entrances. The direction of the crossing can be acquired by the row of the projection of the attention pattern through the soles of the shoes. In addition, truncated domes or cones of the attention pattern were arranged in a square grid, parallel or diagonal at 45 degrees to the principal direction of travel. However, the international standard organization (ISO) allows a wide-ranging size. In this research, the direction indicating performance was compared at the same intervals for the five diameters specified by the international standard. As a result of the experiment, the diagonal array does not indicate the direction of travel, but the projection row does indicate the direction of travel in the parallel array. When the attention pattern is installed at a crosswalk entrance, a parallel array should be installed in the direction of the crossing.