An inexpensive sensor for noise

ABSTRACTNoise is a pervasive workplace hazard that varies spatially and temporally. The cost of direct-reading instruments for noise hampers their use in a network. The objectives for this work were to: (1) develop an inexpensive noise sensor (<$100) that measures A-weighted sound pressure levels within ±2 dBA of a Type 2 sound level meter (SLM; ∼$1,800); and (2) evaluate 50 noise sensors for use in an inexpensive sensor network. The inexpensive noise sensor consists of an electret condenser microphone, an amplifier circuit, and a microcontroller with a small form factor (28 mm by 47 mm by 9 mm) than can be operated as a stand-alone unit. Laboratory tests were conducted to evaluate 50 of the new sensors at 5 sound levels: (1) ambient sound in a quiet office; (2) 3 pink noise test signals from 65–85 dBA in 10 dBA increments; and (3) 94 dBA using a SLM calibrator. Ninety-four percent of the noise sensors (n = 46) were within ±2 dBA of the SLM for sound levels from 65–94 dBA. As sound level increased, bias d...