An additive manufacturing-based approach for carbon fiber reinforced polymer recycling

Abstract The vast Carbon Fiber Reinforced Polymer (CFRP) waste accumulated is pressing for its recycling. A novel recycling approach, which integrated carbon fiber reclamation and composite additive manufacturing, is proposed to process the CFRP waste into three Dimensional (3D) parts. In the experiments, the CFRP waste was recycled by supercritical n-butanol to yield reclaimed Carbon Fibers (rCFs). The rCFs were ground by a ball mill, mixed with Poly-Ether-Ether-Ketone (PEEK) powder and then extruded to the composite filament. The filament was fed to the Fused Deposition Modeling (FDM) printer to fabricate 3D parts. Mechanical and electrical properties of the parts were investigated and compared with that of pure PEEK. The results illustrate that the additive manufacturing-based approach offers a potential strategy to reuse the CFRP waste and rapidly fabricate the rCF reinforced plastics with complex geometry and function.