Feasibility of Remediation Lead, Nickel, Zinc, Copper, and Cadmium-Contaminated Groundwater by Calcium Sulfide

2021 
Metal contamination in groundwater often occurs in various industrial processes. Studies have confirmed that polysulfide could reduce hexavalent chromium to trivalent chromium, achieving the effect of in situ stabilization. For other metal contamination in groundwater, whether polysulfide also had a stabilizing ability to achieve in situ remediation. This research focused on metals in addition to chromium that often contaminated groundwater, including lead, nickel, zinc, copper, and cadmium, to explore the feasibility of using calcium polysulfide (CaSx) as an in situ stabilization technology for these metals’ contamination of groundwater. Results showed that CaSx had a great removal efficiency for metals lead, nickel, zinc, copper, and cadmium. However, for nickel, zinc, copper, and cadmium, when CaSx was added excessively, complexes would be formed, causing the result of re-dissolution, in turn reducing the removal efficiency. As it is difficult to accurately control the dosage of agents for in situ groundwater remediation, the concentration of re-dissolved nickel, zinc, copper, and cadmium may not be able to meet the groundwater control standards. CaSx had high lead removal efficiency and for a concentration of 100 mg/L, the dose of calcium polysulfide was more than the amount of 1/1200 (volume ratio of CaSx to groundwater). In addition, the removal rate was almost 100% and it would not cause re-dissolution due to excessive CaSx dosing. CaSx can be used as an in situ stabilization technique for lead-contaminated groundwater.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    19
    References
    0
    Citations
    NaN
    KQI
    []