The production and properties of poly(aryletherketone) (PEEK) rods oriented by drawing through a conical die
1985
Oriented poly(aryletherketone) (PEEK) rods have been produced by drawing isotropic polymer through a conical die. Room temperature Young's moduli were measured by three-point bending and ranged from 5 GPa at a draw ratio of about 2 to 11 GPa at a draw ratio of about 4. Dynamic mechanical properties were explored in the range −150 to 200°C; two loss peaks were observed, with the higher corresponding to Tg.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
21
References
8
Citations
NaN
KQI