Thermal and mechanical behavior of polyamide 6/polyamide 6I/6T blends

The thermal and mechanical properties of blends, obtained by mixing polyamide 6 (PA6) and an amorphous aromatic copolyamide G21 (ISO nomenclature PA 6I/6T), were investigated by differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. Quenched blends show a single glass transition temperature; the Tg-composition trend was interpreted by means of the Gordon–Taylor equation. The half-time of crystal-lization decreases by increasing the G21 content and this indicates a depression of the overall crystallization rate. A small decrease in the equilibrium melting temperature of PA6 in the blends was observed; this finding suggests that the interaction parameter in PA6/G21 blends is probably very small. The dynamic mechanical analysis of crystallized blends suggests the presence of a homogeneous amorphous phase even if the crystallization of PA6 occurred. The tensile mechanical properties reveal that G21 acts as stiffener of PA6. The collected experimental data suggest that PA6 and G21 are miscible in the composition range investigated. © 1996 John Wiley & Sons, Inc.